After the glass was put on the hull, (last post) I applied a carbon fiber band around the cockpit on the inside of the deck for a tad more strength. Today I finished glassing the inside of the deck, then sanded and seal coated the inside of the hull.  I will be applying the glass to the inside of the hull tomorrow after a bit of light sanding.  After that, I’m building some bulk heads  and shear clamps for the front and back compartments.  I plan to glass tape the seam inside of the cockpit.  The front and back compartments are very tight and the angle of the shear would make glassing those seams a real PITA.

Here’s ya a picture, click on it for more

Tony Olsen