Finally got to do a little on the kayak, I’ve been busy with Mission week at our church. My project was a bathroom re-do, remove the tub and install a shower. In between that and another project for a friend, I glued some more sticks on the ‘yak. I put the cheek plates in [...]

The sanding and cockpit hole cutting went so well today, I decided to glass the top of the deck. Next I’ll glue on the riser pieces and glass them to further strengthen that fragile area on each side of the cockpit. I departed from my usual method of applying a seal coat of [...]

Today I did some sanding and cut out the cockpit hole. I need to go back over it with 150 grit and then glass the top of the deck. Here’s a picture, more pics if you click on it..
winter’s bone hd
filme hd download
watch welcome to the rileys dvdrip
Good building all..
Tony Olsen
jonah hex ipod

I trimmed the over hanging strips today and planed the edge down to within an eigth inch of final size. I will do the final shaping of the deck when it gets joined with the hull. Also got the ROS out and sanded the front half of the deck with 60 grit to [...]

Got the last strip on the deck, that means no more stripping, I can now go to sanding and glassing! First strip went on on May 12th, final strip on May 31st!! I really set a new personal time record for this one. The side of the cockpit area ended up being [...]

Here’s a pic of the strip I put on this morning, it bridges between the front and back parts of the deck at the side of the cockpit.  This is going to be a very fragile area until it is glassed and the coaming riser is glassed on.  I think it will be 2 or [...]

I had to shape the bow and stern a bit. I sanded the bow down and wet it slightly to see the grain, here’s a picture. The book-marked strips on either side of the center strip came out pretty nice. I book-mark matched each pair of strips I put on. About [...]

Good to see Anton got the bug, now there’s no hope for him.
I’ve put 11 Strips on the deck, it’s starting to take shape. Can start to see the lines a bit better. I put a redwood strip down for the middle, flanked by 3 red cedar and then another redwood, [...]

I got the kayak turned over and have started on the deck. I had to rip some more strips this morning then mill the beads and coves. Got started on the stripping about noon and now have 7 strips full length. I’m stripping this one from the middle out and just letting [...]

14 days after applying the first strip, got the last one on the hull. Here’s a picture, you can click on it for more.
Tony
high quality ferocious planet movie

stream shutter island
download whole ticking clock movie
“killers” movie
the the green hornet dvd
the eagle online divx
download hd due date
arthur full dvd