Got the inside of the hull glassed today, first I put a carbon area in the floor and sides of the cockpit then glassed in front of that then behind it. After everything set up and I trimmed the edges, I put the deck on top to see how things were going to look. [...]

After the glass was put on the hull, (last post) I applied a carbon fiber band around the cockpit on the inside of the deck for a tad more strength. Today I finished glassing the inside of the deck, then sanded and seal coated the inside of the hull.  I will be applying the glass [...]

Got a break from all the extra stuff I got going on, so sanded the hull, put the stems on and seal coated it.  Next I applied the dookie smutz to fill the knots and a few cracks.  While that was setting up, I sanded the inside of the deck and applied a seal coat [...]

Finally got to do a little on the kayak, I’ve been busy with Mission week at our church. My project was a bathroom re-do, remove the tub and install a shower. In between that and another project for a friend, I glued some more sticks on the ‘yak. I put the cheek plates in [...]

The sanding and cockpit hole cutting went so well today, I decided to glass the top of the deck. Next I’ll glue on the riser pieces and glass them to further strengthen that fragile area on each side of the cockpit. I departed from my usual method of applying a seal coat of [...]

Today I did some sanding and cut out the cockpit hole. I need to go back over it with 150 grit and then glass the top of the deck. Here’s a picture, more pics if you click on it..
winter’s bone hd
filme hd download
watch welcome to the rileys dvdrip
Good building all..
Tony Olsen
jonah hex ipod

I trimmed the over hanging strips today and planed the edge down to within an eigth inch of final size. I will do the final shaping of the deck when it gets joined with the hull. Also got the ROS out and sanded the front half of the deck with 60 grit to [...]

Got the last strip on the deck, that means no more stripping, I can now go to sanding and glassing! First strip went on on May 12th, final strip on May 31st!! I really set a new personal time record for this one. The side of the cockpit area ended up being [...]

Here’s a pic of the strip I put on this morning, it bridges between the front and back parts of the deck at the side of the cockpit.  This is going to be a very fragile area until it is glassed and the coaming riser is glassed on.  I think it will be 2 or [...]

I had to shape the bow and stern a bit. I sanded the bow down and wet it slightly to see the grain, here’s a picture. The book-marked strips on either side of the center strip came out pretty nice. I book-mark matched each pair of strips I put on. About [...]